TECPINT SUPER by Tecno Prodist - Water-based Paint for Exterior and Interior - Great whiteness - Washable - Easy Application

APPLICATIONS:

TECPINT SUPER is a matte plastic paint based on an acrylic emulsion for interiors and exteriors.

TECPINT SUPER is special for painting interior and exterior surfaces of plaster, stucco, plasterboard, concrete, etc.

TECPINT SUPER has good application properties and good resistance to atmospheric agents.

HOW TO USE:

New surfaces:

Remove dust, grease and other contaminants by mechanical or manual procedures.

Level irregularities with TECPINT MASILLA. Let dry and sand. Remove dust by brushing.

Apply a roller coat of TECPINT PRIMER with a dilution of 1: 4 parts of water. Let dry between 2 and 4 hours.

Apply two coats by roller of TECPINT SUPER diluted 10% with water. Let dry 4 hours between coats.

Painted surfaces in poor condition:

Completely remove the product by mechanical or manual procedures and proceed as in the case of new surfaces.

Surfaces with tempera paint, glue or very powdery:

Apply a roller coat of TECPINT PRIMER with a dilution of 1: 4 parts of water. Let dry 12 hours.

Apply two coats by roller of TECPINT SUPER diluted 10% with water. Let dry 4 hours between coats.

Surfaces with mold problems:

Disinfect the surface with a bleach dilution of 1: 6 parts of water, depending on the state of the wall. Let dry for 12 to 24 hours.

Apply a roller coat of TECPINT PRIMER with a dilution of 1: 4 parts of water. Let dry 12 hours.

Roller apply two coats of TECPINT SUPER diluted 5-10º/o with water. Let dry 4 hours between coats.

RECOMMENDATIONS:

Do not apply at temperatures below 5ºC.

Do not apply with relative humidity above 85% or on wet supports.

Store in cool and dry places.

For cleaning utensils and tools use water.